Writing and Organizing Tests

Folder structure

After adding a new project, Cypress will automatically scaffold out a suggested folder structure. By default it will create:

E2E:
/cypress.config.js
/cypress/fixtures/example.json
/cypress/support/commands.js
/cypress/support/e2e.js

Component:
/cypress.config.js
/cypress/fixtures/example.json
/cypress/support/commands.js
/cypress/support/component.js
/cypress/support/component-index.html

Both:
/cypress.config.js
/cypress/fixtures/example.json
/cypress/support/commands.js
/cypress/support/e2e.js
/cypress/support/component.js
/cypress/support/component-index.html
E2E:
/cypress.config.ts
/cypress/fixtures/example.json
/cypress/support/commands.ts
/cypress/support/e2e.ts

Component:
/cypress.config.ts
/cypress/fixtures/example.json
/cypress/support/commands.ts
/cypress/support/component.ts
/cypress/support/component-index.html

Both:
/cypress.config.ts
/cypress/fixtures/example.json
/cypress/support/commands.ts
/cypress/support/e2e.ts
/cypress/support/component.ts
/cypress/support/component-index.html

Configuring Folder Structure

While Cypress allows you to configure where your tests, fixtures, and support files are located, if you're starting your first project, we recommend you use the above structure.

You can modify the folder configuration in your configuration file. See the Cypress configuration for more detail.

Spec files

Test files are located in cypress/e2e by default, but can be configured to another directory. Test files may be written as:

  • .js
  • .jsx
  • .ts
  • .tsx
  • .coffee
  • .cjsx

Cypress also supports ES2015 out of the box. You can use either ES2015 modules or CommonJS modules. This means you can import or require both npm packages and local relative modules.

To see an example of every command used in Cypress, open the 2-advanced-examples folder within your cypress/e2e folder.

Fixture Files

Fixtures are used as external pieces of static data that can be used by your tests. Fixture files are located in cypress/fixtures by default, but can be configured to another directory.

You would typically use them with the cy.fixture() command and most often when you're stubbing Network Requests.

Asset Files

There are some folders that may be generated after a test run, containing assets that were generated during the test run.

You may consider adding these folders to your .gitignore file to ignore checking these files into source control.

Download Files

Any files downloaded while testing an application's file download feature will be stored in the downloadsFolder which is set to cypress/downloads by default.

/cypress
  /downloads
    - records.csv

Screenshot Files

If screenshots were taken via the cy.screenshot() command or automatically when a test fails, the screenshots are stored in the screenshotsFolder which is set to cypress/screenshots by default.

/cypress
  /screenshots
    /app.cy.js
      - Navigates to main menu (failures).png

To learn more about screenshots and settings available, see Screenshots and Videos

Video Files

Any videos recorded of the run are stored in the videosFolder which is set to cypress/videos by default.

/cypress
  /videos
    - app.cy.js.mp4

Asset File Paths

Generated screenshots and videos are saved inside their respective folders (cypress/screenshots, cypress/videos). The paths of the generated files will be stripped of any common ancestor paths shared between all spec files found by the specPattern option (or via the --spec command line option or spec module API option, if specified)

Example 1:

  • Spec file found
    • cypress/e2e/path/to/file/one.cy.js
  • Common ancestor paths (calculated at runtime)
    • cypress/e2e/path/to/file
  • Generated screenshot file
    • cypress/screenshots/one.cy.js/your-screenshot.png
  • Generated video file
    • cypress/videos/one.cy.js.mp4

Example 2:

  • Spec files found
    • cypress/e2e/path/to/file/one.cy.js
    • cypress/e2e/path/to/two.cy.js
  • Common ancestor paths (calculated at runtime)
    • cypress/e2e/path/to/
  • Generated screenshot files
    • cypress/screenshots/file/one.cy.js/your-screenshot.png
    • cypress/screenshots/two.cy.js/your-screenshot.png
  • Generated video files
    • cypress/videos/file/one.cy.js.mp4
    • cypress/videos/two.cy.js.mp4

To learn more about videos and settings available, see Screenshots and Videos

Plugins file

The plugins file is a special file that executes in Node before the project is loaded, before the browser launches, and during your test execution. While the Cypress tests execute in the browser, the plugins file runs in the background Node process, giving your tests the ability to access the file system and the rest of the operating system by calling the cy.task() command.

The plugins file is a good place to define how you want to bundle the spec files via the preprocessors, how to find and launch the browsers via the browser launch API, and other cool things. Read our plugins guide for more details and examples.

The initial imported plugins file can be configured to another file.

Support file

To include code before your test files, set the supportFile path. By default, supportFile is set to look for one of the following files:

Component:

  • cypress/support/component.js
  • cypress/support/component.jsx
  • cypress/support/component.ts
  • cypress/support/component.tsx

E2E:

  • cypress/support/e2e.js
  • cypress/support/e2e.jsx
  • cypress/support/e2e.ts
  • cypress/support/e2e.tsx

Cypress automatically creates an example support file for each configured testing type, which has several commented out examples.

This file runs before every single spec file. We do this purely as a convenience mechanism so you don't have to import this file.

By default Cypress will automatically include type-specific support files. For E2E, the default is cypress/support/e2e.{js,jsx,ts,tsx}, and for Component Testing cypress/support/component.{js,jsx,ts,tsx}.

The support file is a great place to put reusable behavior such as custom commands or global overrides that you want applied and available to all of your spec files.

The initial imported support file can be configured to another file or turned off completely using the supportFile configuration. From your support file you can import or require other files to keep things organized.

You can define behaviors in a before or beforeEach within any of the cypress/support files:

beforeEach(() => {
  cy.log('I run before every test in every spec file!!!!!!')
})
Global hooks for tests

Execution

Cypress executes the support file before the spec file. For example, when Cypress executes a spec file via cypress open or cypress run, it executes the files in the following order:

e2e example:

  1. support/e2e.js (your support file)
  2. e2e/spec-a.cy.js (your spec file)

component example:

  1. support/component.js (your support file)
  2. components/Button/Button.cy.js (your spec file)

Troubleshooting

If Cypress does not find the spec files for some reason, you can troubleshoot its logic by opening or running Cypress with debug logs enabled:

DEBUG=cypress:server:specs npx cypress open
## or
DEBUG=cypress:server:specs npx cypress run

Writing tests

Cypress is built on top of Mocha and Chai. We support both Chai's BDD and TDD assertion styles. Tests you write in Cypress will mostly adhere to this style.

If you're familiar with writing tests in JavaScript, then writing tests in Cypress will be a breeze.

Test Structure

The test interface, borrowed from Mocha, provides describe(), context(), it() and specify().

context() is identical to describe() and specify() is identical to it(), so choose whatever terminology works best for you.

// -- Start: Our Application Code --
function add(a, b) {
  return a + b
}

function subtract(a, b) {
  return a - b
}

function divide(a, b) {
  return a / b
}

function multiply(a, b) {
  return a * b
}
// -- End: Our Application Code --

// -- Start: Our Cypress Tests --
describe('Unit test our math functions', () => {
  context('math', () => {
    it('can add numbers', () => {
      expect(add(1, 2)).to.eq(3)
    })

    it('can subtract numbers', () => {
      expect(subtract(5, 12)).to.eq(-7)
    })

    specify('can divide numbers', () => {
      expect(divide(27, 9)).to.eq(3)
    })

    specify('can multiply numbers', () => {
      expect(multiply(5, 4)).to.eq(20)
    })
  })
})
// -- End: Our Cypress Tests --

Hooks

Cypress also provides hooks (borrowed from Mocha).

These are helpful to set conditions that you want to run before a set of tests or before each test. They're also helpful to clean up conditions after a set of tests or after each test.

before(() => {
  // root-level hook
  // runs once before all tests
})

beforeEach(() => {
  // root-level hook
  // runs before every test block
})

afterEach(() => {
  // runs after each test block
})

after(() => {
  // runs once all tests are done
})

describe('Hooks', () => {
  before(() => {
    // runs once before all tests in the block
  })

  beforeEach(() => {
    // runs before each test in the block
  })

  afterEach(() => {
    // runs after each test in the block
  })

  after(() => {
    // runs once after all tests in the block
  })
})

The order of hook and test execution is as follows:

  • All before() hooks run (once)
  • Any beforeEach() hooks run
  • Tests run
  • Any afterEach() hooks run
  • All after() hooks run (once)

Excluding and Including Tests

To run a specified suite or test, append .only to the function. All nested suites will also be executed. This gives us the ability to run one test at a time and is the recommended way to write a test suite.

// -- Start: Our Application Code --
function fizzbuzz(num) {
  if (num % 3 === 0 && num % 5 === 0) {
    return 'fizzbuzz'
  }

  if (num % 3 === 0) {
    return 'fizz'
  }

  if (num % 5 === 0) {
    return 'buzz'
  }
}
// -- End: Our Application Code --

// -- Start: Our Cypress Tests --
describe('Unit Test FizzBuzz', () => {
  function numsExpectedToEq(arr, expected) {
    // loop through the array of nums and make
    // sure they equal what is expected
    arr.forEach((num) => {
      expect(fizzbuzz(num)).to.eq(expected)
    })
  }

  it.only('returns "fizz" when number is multiple of 3', () => {
    numsExpectedToEq([9, 12, 18], 'fizz')
  })

  it('returns "buzz" when number is multiple of 5', () => {
    numsExpectedToEq([10, 20, 25], 'buzz')
  })

  it('returns "fizzbuzz" when number is multiple of both 3 and 5', () => {
    numsExpectedToEq([15, 30, 60], 'fizzbuzz')
  })
})

To skip a specified suite or test, append .skip() to the function. All nested suites will also be skipped.

it.skip('returns "fizz" when number is multiple of 3', () => {
  numsExpectedToEq([9, 12, 18], 'fizz')
})

Test Isolation

Test isolation is the practice of resetting application state before each test.

Cleaning up state ensures that the operation of one test does not affect another test later on. The goal for each test should be to reliably pass whether run in isolation or consecutively with other tests. Having tests that depend on the state of an earlier test can potentially cause nondeterministic test failures.

Cypress supports two modes of test isolation, legacy and strict.

Legacy Mode

When in legacy mode, Cypress handles resetting the state for:

Strict Mode

When in strict mode, Cypress handles resetting the state for everything outlined above for legacy mode, in addition to clearing the page by visiting about:blank before each test. This clears the dom's state and non-persistent browser state. This forces you to re-visit your application and perform the series of interactions needed to build the dom and browser state so the tests can reliably pass when run standalone or in a randomized order.

The test isolation mode is a global configuration and can be overridden at the describe level with the testIsolation option.

Test Configuration

It is possible to apply test configuration values to a suite or test. Pass a configuration object to the test or suite function as the second argument.

This configuration will take effect during the suite or tests where they are set then return to their previous default values after the suite or tests are complete.

Syntax

describe(name, config, fn)
context(name, config, fn)
it(name, config, fn)
specify(name, config, fn)

Allowed config values

Note: Some configuration values are readonly and cannot be changed via test configuration. Be sure to review the list of test configuration options .

Suite configuration

If you want to target a suite of tests to run or be excluded when run in a specific browser, you can override the browser configuration within the suite configuration. The browser option accepts the same arguments as Cypress.isBrowser().

The following suite of tests will be skipped if running tests in Chrome browsers.

describe('When NOT in Chrome', { browser: '!chrome' }, () => {
  it('Shows warning', () => {
    cy.get('[data-testid="browser-warning"]').should(
      'contain',
      'For optimal viewing, use Chrome browser'
    )
  })

  it('Links to browser compatibility doc', () => {
    cy.get('a.browser-compat')
      .should('have.attr', 'href')
      .and('include', 'browser-compatibility')
  })
})

The following suite of tests will only execute when running in the Firefox browser. It will overwrite the viewport resolution in one of the tests, and will merge any current environment variables with the provided ones.

describe(
  'When in Firefox',
  {
    browser: 'firefox',
    viewportWidth: 1024,
    viewportHeight: 700,
    env: {
      DEMO: true,
      API: 'http://localhost:9000',
    },
  },
  () => {
    it('Sets the expected viewport and API URL', () => {
      expect(cy.config('viewportWidth')).to.equal(1024)
      expect(cy.config('viewportHeight')).to.equal(700)
      expect(cy.env('API')).to.equal('http://localhost:9000')
    })

    it(
      'Uses the closest API environment variable',
      {
        env: {
          API: 'http://localhost:3003',
        },
      },
      () => {
        expect(cy.env('API')).to.equal('http://localhost:3003')
        // other environment variables remain unchanged
        expect(cy.env('DEMO')).to.be.true
      }
    )
  }
)

Single test configuration

You can configure the number of retry attempts during cypress run or cypress open. See Test Retries for more information.

it('should redirect unauthenticated user to sign-in page', {
    retries: {
      runMode: 3,
      openMode: 2
    }
  } () => {
    // test code...
  })
})

Dynamically Generate Tests

You can dynamically generate tests using JavaScript.

describe('if your app uses jQuery', () => {
  ;['mouseover', 'mouseout', 'mouseenter', 'mouseleave'].forEach((event) => {
    it('triggers event: ' + event, () => {
      // if your app uses jQuery, then we can trigger a jQuery
      // event that causes the event callback to fire
      cy.get('#with-jquery')
        .invoke('trigger', event)
        .get('[data-testid="messages"]')
        .should('contain', 'the event ' + event + 'was fired')
    })
  })
})

The code above will produce a suite with 4 tests:

> if your app uses jQuery
  > triggers event: 'mouseover'
  > triggers event: 'mouseout'
  > triggers event: 'mouseenter'
  > triggers event: 'mouseleave'

Assertion Styles

Cypress supports both BDD (expect/should) and TDD (assert) style plain assertions. Read more about plain assertions.

it('can add numbers', () => {
  expect(add(1, 2)).to.eq(3)
})

it('can subtract numbers', () => {
  assert.equal(subtract(5, 12), -7, 'these numbers are equal')
})

The .should() command and its alias .and() can also be used to more easily chain assertions off of Cypress commands. Read more about assertions.

cy.wrap(add(1, 2)).should('equal', 3)

Running tests

You can run a test by clicking on the spec filename. For example the Cypress RealWorld App has multiple test files, but below we run the "new-transaction.spec.ts" test file by clicking on it.

Running a single spec

Test statuses

After the Cypress spec completes every test has one of 4 statuses: passed, failed, pending, or skipped.

Passed

Passed tests have successfully completed all their commands without failing any assertions. The test screenshot below shows a passed test:

Cypress with a single passed test

Note that a test can pass after several test retries. In that case the Command Log shows some failed attempts, but ultimately the entire test finishes successfully.

Failed

Good news - the failed test has found a problem. Could be much worse - it could be a user hitting this bug!

Cypress with a single failed test

After a test fails, the screenshots and videos can help find the problem so it can be fixed.

Pending

You can write placeholder tests in several ways as shown below, and Cypress knows NOT to run them. Cypress marks all the tests below as pending.

describe('TodoMVC', () => {
  it('is not written yet')

  it.skip('adds 2 todos', function () {
    cy.visit('/')
    cy.get('[data-testid="new-todo"]')
      .type('learn testing{enter}')
      .type('be cool{enter}')
    cy.get('[data-testid="todo-list"] li').should('have.length', 100)
  })

  xit('another test', () => {
    expect(false).to.true
  })
})

All 3 tests above are marked pending when Cypress finishes running the spec file.

Cypress with three pending test

So remember - if you (the test writer) knowingly skip a test using one of the above three ways, Cypress counts it as a pending test.

Skipped

The last test status is for tests that you meant to run, but these tests were skipped due to some run-time error. For example, imagine a group of tests sharing the same beforeEach hook - where you visit the page in the beforeEach hook.

/// <reference types="cypress" />

describe('TodoMVC', () => {
  beforeEach(() => {
    cy.visit('/')
  })

  it('hides footer initially', () => {
    cy.get('[data-testid="filters"]').should('not.exist')
  })

  it('adds 2 todos', () => {
    cy.get('[data-testid="new-todo"]')
      .type('learn testing{enter}')
      .type('be cool{enter}')
    cy.get('[data-testid="todo-list"] li').should('have.length', 2)
  })
})

If the beforeEach hook completes and both tests finish, two tests are passing.

Cypress showing two passing tests

But what happens if a command inside the beforeEach hook fails? For example, let's pretend we want to visit a non-existent page /does-not-exist instead of the /. If we change our beforeEach to fail:

beforeEach(() => {
  cy.visit('/does-not-exist')
})

When Cypress starts executing the first test, the beforeEach hook fails. Now the first test is marked as failed. BUT if the beforeEach hook failed once, why would we execute it again before the second test? It would just fail the same way! So Cypress skips the remaining tests in that block, because they would also fail due to the beforeEach hook failure.

Cypress showing one failed and one skipped test

If we collapse the test commands, we can see the empty box marking the skipped test "adds 2 todos".

Cypress showing one skipped test

The tests that were meant to be executed but were skipped due to some run-time problem are marked "skipped" by Cypress.

Tip: read the blog post Cypress Test Statuses for more examples explaining the reasoning behind these test statuses. Read the blog post Writing Test Progress to learn how to use the pending tests to tracking the test strategy implementation.

Watching tests

When running in using cypress open, Cypress watches the filesystem for changes to your spec files. Soon after adding or updating a test Cypress will reload it and run all of the tests in that spec file.

This makes for a productive development experience because you can add and edit tests as you're implementing a feature and the Cypress user interface will always reflect the results of your latest edits.

What is watched?

Files

Folders

  • E2E directory (cypress/e2e/ by default)
  • Support directory (cypress/support/ by default)

The folder, the files within the folder, and all child folders and their files (recursively) are watched.

What isn't watched?

Everything else; this includes, but isn't limited to, the following:

  • Your application code
  • node_modules
  • cypress/fixtures/

If you're developing using a modern JS-based web application stack then you've likely got support for some form of hot module replacement which is responsible for watching your application code—HTML, CSS, JS, etc.—and transparently reloading your application in response to changes.

Configuration

Set the watchForFileChanges configuration property to false to disable file watching.

The component responsible for the file-watching behavior in Cypress is the webpack-preprocessor. This is the default file-watcher packaged with Cypress.

If you need further control of the file-watching behavior you can configure this preprocessor explicitly: it exposes options that allow you to configure behavior such as what is watched and the delay before emitting an "update" event after a change.

Cypress also ships other file-watching preprocessors; you'll have to configure these explicitly if you want to use them.